Comtech EF Data SLM-5650A Installation And Operation Manual page 252

SLM-5650A Satellite Modem
TRANSEC Module HTTPS Interface
10.2 TRANSEC Module HTTPS Interface
The user can fully control and monitor operation of the
SLM-5650A TRANSEC Module from its HTTPS (Secure HTTP)
Interface. By rolling the cursor over the tabs located at the top of
each page (shown at right), the user can select from the available
nested hyperlinks.
The pages in the SLM-5650A TRANSEC Module HTTPS Interface have been designed for
optimal performance when using Microsoft's Internet Explorer Ver. 7.0 or higher or Mozilla
Firefox Ver. 2.0 or higher (the examples shown use Internet Explorer Ver. 7.0).
10.3 Accessing the TRANSEC Module HTTPS Interface
From the PC, type https://www.xxx.yyy.zzz (where "www.xxx.yyy.zzz" represents the IP address
of the SLM-5650A TRANSEC Module) into the Address area of the Web browser:
The user may be prompted with a Security
Alert. Should the advisory appear, click
[Continue to this website] to proceed.
From any page in the TRANSEC Module
HTTPS interface, the user may select one of
three modes of operation using the Interface
Navigator drop-down menu, located at the
top left-hand corner of all TRANSEC
Module HTTPS Interface pages:
• Crypto Officer: Connects the user
to the secure TRANSEC Module
HTTPS Interface (User Name and
Password required).
Modem Operator: Connects the
•
user to the Base Modem HTTP
Interface. See Chapter 7. BASE
MODEM HTTP INTERFACE for
further information.
• Network Operator: Connects the
user to the secure Network
Processor (NP) HTTP/HTTPS
Interface (User Name and Password
required). See Chapter Sect. 8.6 NP
HTTP/ HTTPS Interface for
further information.
To continue to the TRANSEC Module
10–2
Revision 8
MN-SLM5650A