Select: Monitor - Comtech EF Data SLM-5650A Installation And Operation Manual

SLM-5650A Satellite Modem
Front Panel Operation

5.2.4 SELECT: Monitor

Monitor: Alarms
CnC
Use the  arrow keys to select Alarms, Event-Log, Rx-Params, CnC, Stats, Gigabit I/F, or
Stats, and then press [ENT].
Submenu
Alarms
Event-Log
Rx-Params
CnC
Stats
GigaBit I/F Stats
5.2.4.1 Monitor: Alarms
Live Alarms: Transmit
Use the  arrow keys to select Transmit, Receive, or Unit, and then press [ENT].
Monitor: Alarms
Mod:
Intf: ----
Press [ENT] to enable access to the available read-only Modulator and Intf (Interface)Tx alarm
status screens. Use the  arrow keys to then page through the available Modulator and
Interface character positions (Mod#1 through #4, and Tx Intf#1 through #4). The status message
to the right changes based on the current position, as per the following table:
Transmit (Tx) Alarm Position
Top row
Bottom row
Event-Log
Stats GigaBit I/F Stats
Function
Select and view Transmit, Receive, or Unit alarms.
Select to View or Clear-All stored events and view modem parameters.
Select to view FC, RSL, BERT, Buffer, Eb/No, or BER.
Select to view CnC Delay, FreqOffset, Eb/No, or Ratio
Select to View, Clear-All or Config statistics.
Select to View or Clear-All Gigabit Interface link statistics.
Transmit

----
Description
Mod #1 Modulator symbol clock Phase Lock Loop status.
Mod #2 Modulator RF Synthesizer Phase Lock Loop status.
Mod #3 Modulator IQ activity status.
Mod #4 Modulator Nyquist filter Over range.
Tx Intf #1
Transmit data interface clock Phase Lock Loop status.
Tx Intf #2
Transmit data interface terrestrial clock activity status.
Tx Intf #3
Transmit data interface SCT (send clock timing) Phase Lock Loop status.
Tx Intf #4
Transmit data interface AIS (alarm indication signal) status.
Rx-Params
Receive Unit
Press <ENT> for
detailed status
5–34
Revision 8
MN-SLM5650A
(E)