Figure 8-8. Admin | Security (Management Security) Page - Comtech EF Data SLM-5650A Installation And Operation Manual

SLM-5650A Satellite Modem
Network Processor (NP) Interface
8.6.6.2.3 Admin | Security (Account Information)
The Admin user may use this page to control access to all base modem HTTP and NP Interface
HTTP/HTTPS pages. However, the Admin user does not have access to the optional TRANSEC
Module parameters; this functionality is only available via the Crypto Officer login provided
separately on the TRANSEC Module HTTPS Interface. See Chapter 10. TRANSEC MODULE
HTTPS INTERFACE for further information.
Admin Account Info
The login process requires a name and password as defined by the systems administrator of the
controlling equipment. This name and password is associated to the name and password of an
administrator account. Set the desired Admin User Name and Admin Password for the
administrator account, and then click [Submit] to apply these settings.
Note: The Admin User Name and Password settings are maintained separately from the IP
Interface Security Mode and SSH sections on this page.
IP Interface Security Mode
The desired IP Interface Security Mode can be set to either Low Level Security for HTTP/FTP/
SNMP/Telnet access, or High Level Security for HTTPS/SSH (Secure Shell) access only. Click
[Submit] to apply this setting. More specifically:
• When Management Security is set to Low Level Security, the NP Interface can be
managed by non-secure protocols such as HTTP and Telnet.
• When Management Security is set to High Level Security, the following restrictions
apply:

Figure 8-8. Admin | Security (Management Security) page

8–14
Revision 8
MN-SLM5650A