Table 10-1. Event Log Message Types - Comtech EF Data SLM-5650A Installation And Operation Manual

SLM-5650A Satellite Modem
TRANSEC Module HTTPS Interface
Event Type
Informational
Warning
Minor
Major
Critical
Click [Clear Log] to clear the event log of all messages. The event log is reset to zero entries.

Table 10-1. Event Log Message Types

Event Type (By order of severity – from least to worst case)
Event Description
Normal operational status change; e.g.,
successful password or configuration setting
change.
Status change that the system might not
accept or expect; e.g., setting the future
passphrase without first setting the future
seed key, entering an invalid remote
command, etc.
Error condition that the system should be
able to recover from without affecting the
operation of the system; e.g., encountering
software 'bug', etc.
Such events are not recorded into the
Events Log.
A more severe error that may indicate a
degradation of the stability of the system;
e.g., out-of-range temperature readings for
the TRANSEC Module, etc.
The most severe error level indicating that
system failure has occurred or is imminent;
e.g., memory allocation failure, OS failure,
etc.
Level of Severity / User Action
Minimum. Event logged is for user reference only.
Moderate. User should consult the pertinent
sections of this manual to troubleshoot, then repeat
command or procedure as needed.
Moderate. User should report issues when
convenient to Comtech EF Data Customer Support
(i.e., via the means available through the SLM-
5650A TRANSEC Module Web Interface Home |
Contact page, or by using the SLM-5650 Web
Server Interface Home | Support e-mail interface,
etc.).
Maximum. User should contact Comtech EF
Data Customer Support as soon as possible to
address issue.
Maximum. User should contact Comtech EF
Data Customer Support
for RMA / in-factory service.
10–12
Revision 8
MN-SLM5650A
immediately to arrange