Comtech EF Data SLM-5650A Installation And Operation Manual page 386

SLM-5650A Satellite Modem
Appendix C
Command Arguments for
Parameter (Instruction
Type Code and
Qualifier)
ASYNC ESC Tx ATB= 1 byte
Baud Rate
ASYNC ESC Tx ATF= 2 bytes
Format
Clear All AUPC CAA= None
Log Entries
Initialize AUPC IAP= None
Log Pointer
Command or
Response to
Query
Command or Query.
Baud Rate, where:
0=110
1=150
2=300
3=600
4=1200
5=2400
6=4800
7=9600
8=19200
9=38400
Example: ATB=0 (sets the ASYNC ESC Tx Baud Rate to 110 Baud)
Command or Query.
Async Format, where:
00=7 Bits, No Parity, 1 Stop Bit
01=7 Bits, Even Parity, 1 Stop Bit
02=7 Bits, Odd Parity, 1 Stop Bit
03=7 Bits, No Parity, 2 Stop Bits
04=7 Bits, Even Parity, 2 Stop Bits
05=7 Bits, Odd Parity, 2 Stop Bits
06=8 Bits, No Parity, 1 Stop Bit
07=8 Bits, Even Parity, 1 Stop Bit
08=8 Bits, Odd Parity, 1 Stop Bit
09=8 Bits, No Parity, 2 Stop Bits
10=8 Bits, Even Parity, 2 Stop Bits
11=8 Bits, Odd Parity, 2 Stop Bits
Example: ATF=00 (sets the ASYNC ESC Tx Format to 7N1)
Command only.
Forces the software to clear the software AUPC log.
Note: This command takes no arguments.
Example: AAS=
Command only.
Resets internal pointer to allow RNA? queries to start at the beginning of the stored
statistics log.
Description of Arguments
C–34
Revision 8
MN-SLM5650A
Query
Response to (Instruction
Response to Query
Command Code and
Qualifier)
ATB= ATB? ATB=x
ATB? (see Description
ATB* of Arguments)
ATB#
ATF= ATF? ATF=xx
ATF? (see Description
ATF* of Arguments)
ATF#
CAA= N/A N/A
CAA?
CAA*
CAA#
IAP= N/A N/A
IAP#