Comtech EF Data SLM-5650A Installation And Operation Manual page 268

SLM-5650A Satellite Modem
TRANSEC Module SSH CLI Operation
Any changes made via the CLI should be saved to permanent storage prior to terminating the
CLI session. While changes will remain active so long as the modem remains in operation,
take note also that changes will be lost if, for example, the SLM-5650A loses power.
Modified parameters can be saved by issuing the Save command "S" from any menu. The
user is prompted to confirm that all changes should be made permanent:
4. The user is prompted, when attempting to terminate a CLI session via Logout command "L",
to verify that the session should be ended:
11–4
Revision 8
MN-SLM5650A