E.3.2 Bpm Mode Configuration - Comtech EF Data SLM-5650A Installation And Operation Manual

SLM-5650A Satellite Modem
Appendix E
E.3.2 BPM Mode Configuration
BPM Mode is available on the NP Interface as an optional FAST Feature. Once the FAST
Feature Code has been purchased during normal business hours from Comtech EF Data Customer
Support, it is then activated in the NP Interface-equipped modem via the modem front panel.
Once activated, BPM Mode must then be enabled for operation.
See Chapter Sect. 1.3.3.6 Fully Accessible System Topology (FAST), Chapter
Sect. 5.3.7.10 Utility: FAST or Chapter Sect. 8.6.5.2.2 Admin | FAST Features for
more information about FAST Features.
BPM Mode may be enabled for operation via
either the SLM-5650A front panel menu
(CONFIG: Remote  EthernetConfig 
Option Card Addr  Network Proc), or the
NP Interface HTTP/HTTPS Interface 'Admin
| Vipersat Modes' page.
See Chapter Sect. 5.3.3.9
CONFIG: Remote or Chapter
Sect. 8.6.5.2.1 Admin | Vipersat
Mode (FAST Feature Required)
for further details.
E–10
Revision 8
MN-SLM5650A