Telnet Interface - Comtech EF Data SLM-5650A Installation And Operation Manual

SLM-5650A Satellite Modem
Ethernet-Based Management
6.5

Telnet Interface

See Chapter 9. NP INTERFACE TELNET/SSH CLI OPERATION for further details on
operations via this non-secure interface.
A Telnet interface is provided for the purpose of Equipment M&C via the standard Remote
Control protocol. The Telnet interface requires login at the Administrator and Read/Write User
Access Levels.
An example of the login
process is shown in this
example to the right:
Once logged into the Telnet
interface, the standard remote
control interface (as defined in
Appendix C. REMOTE
CONTROL) is accessible as
shown in this next example:
6–8
Revision 8
MN-SLM5650A