Table 3-1. Slm-5650A Rear Panel Connectors - Comtech EF Data SLM-5650A Installation And Operation Manual

SLM-5650A Satellite Modem
Rear Panel Connectors and Pinouts
Connector Group
Ref Des / Name
(Chapter Sect.)
IF
J2 Tx
(Sect. 3.2)
J11 Tx
J4 Rx
J3 Rx
Terrestrial Data J5 Ethernet
(Sect. 3.3)
P1 Overhead Data
J6 EIA-530
J7 HSSI
(Interface Option Slot)
Utility
J1 Ext Ref
(Sect. 3.4)
J8 Alarms
J9 Auxiliary
J10 Remote
Power/Ground AC
(Sect 3.5)
DC
Ground
To maintain compliance with the European EMC Directive 2004/108/EEC (EN 55022, EN-
55024), properly shielded cables are required for all data I/O.
The 'D-Shell' connectors (J6, J8, J9, J10, P1) provided on the SLM-5650A rear panel
feature threaded nuts to ensure the mechanical integrity of the mated connections.

Table 3-1. SLM-5650A Rear Panel Connectors

Connector Type
Type 'N' female (L-Band)
TNC female (70/140MHz band)
Type 'N' female (L-Band)
TNC female (70/140MHz band)
RJ-45 female
25-pin Type 'D' male
25-pin Type 'D' female
50-pin female
See Sect. 3.3.5.
TNC female
9-pin Type 'D' female
15-Pin Type 'HD' Female
9-pin Type 'D' female
See Sect. 3.5.1
N/A
#10-32 stud
Function
IF Output
IF Input
10/100 BaseT, Remote Control
See Sect. 3.3.2 for details
2
Data I/O to 20 Mbps
2
Data I/O to 51.84 Mbps
Supports optional data interfaces
Modem Reference I/O
Form C Alarms (relay closures)
2
See Sect. 3.4.3 for details
2
Serial Remote Interface (RS232/485)
2
Chassis power
Chassis power
Common Chassis Ground
3–2
Revision 8
MN-SLM5650A