SLM-5650A Satellite Modem
NP Interface Telnet/SSH CLI Operation
9.2.6 LAN Menu page (N)
The LAN Menu page, opened from the Main Menu, contains the following options or fields:
Menu Options/Fields
Interface
Ethernet Ports
ARP Menu
Flow Control
Proxy ARP
Port VLAN Enable
Port VLAN Select
Port VLAN Id
Entry Description
The LAN Interface menu allows the user to view the MAC address
I
of the Network Processor and set the IP address and mask of the
Network Processor:
The Ethernet Ports menu allows the user to view the current status
E
of the Ethernet ports and set each port to auto-negotiate or for
manual configuration.
The ARP Menu allows the user to view and edit the ARP (Address
A
Resolution Protocol) table.
Prompts user to select
F
0 – Disabled
Prompts user to select
P
0 – Disabled
Prompts user to select
M
0 – Disabled
Prompts user to select
N
0 – Port 1
1 – Port 2
Enter an ID value from 2 to 4095. Packets containing specified
O
VLAN only will ingress and egress from the NP Interface port
specified via "VLAN Port Select" (Entry "N").
9–21
Revision 8
MN-SLM5650A
1 – Enabled
1 – Enabled
1 – Enabled
2 – Port 3
3 – Port 4