Comtech EF Data SLM-5650A Installation And Operation Manual page 75

SLM-5650A Satellite Modem
Updating Firmware
Step Task
10 To update the Network Processor Bulk firmware:
Open the Admin | Upgrade page:
a)
In the Upgrade section of the page, locate the update file downloaded to the PC during Steps 2 through 4:
b)
•
•
c) Select the update file, then click [Open]. The filename should appear in the Upgrade Image File text box.
Click [Upload] to begin the Image Upgrade process.
d)
11 Wait while the file transfers. After [Upload] is clicked, the Image Upgrade page appears while the Network
Processor first transfers, and then uploads, the update file from the PC. Allow sufficient time for the file to be loaded
into the NP Module – uploading will take approximately five minutes.
It is not necessary to wait five minutes before clicking [OK], but you MUST wait five
minutes before rebooting the modem.
During the upload process, the page displays a transfer progress bar that provides the scrolling percentage of
completion. During transfer, the message Please Wait... displays:
Click [Browse]. The Choose File dialog box will open.
Locate the folder created for the file download; double-click on the folder name to open the folder.
4–7
Revision 8
MN-SLM5650A