Comtech EF Data SLM-5650A Installation And Operation Manual page 390

SLM-5650A Satellite Modem
Appendix C
Command Arguments for
Parameter (Instruction
Type Code and
Qualifier)
Receive T1 T1F= 1 byte, value of
Framing 0 or 1
Receive T2 T2F= 1 byte, value of
Framing 0, 1, 3, or 5
Tx Ternary TTC= 1 byte, value of
Code 0 thru 3
Command or
Response to
Query
Command or Query.
Receive T1 Framing, where:
0=None
1=G.704
Note: Commands as well as queries are not allowed when either the GigaBit
Ethernet or NP card has been selected as the current interface type.
Example: T1F=0
Command or Query.
Receive T2 Framing, where:
0=None
1=G.704
3=G.743
5=G.747
Note: Commands as well as queries are not allowed when either the GigaBit
Ethernet or NP card has been selected as the current interface type.
Example: T2F=0
Command or Query.
Tx Ternary Code, where:
0=AMI
1=B8ZS
2=B6ZS
3=HDB3
Example: TTC=3 (Set Tx Ternary Code to HDB3)
Description of Arguments
C–38
Revision 8
MN-SLM5650A
Query
Response to (Instruction
Response to Query
Command Code and
Qualifier)
T1F= T1F? T1F=x
T1F? (see Description
T1F* of Arguments)
T1F#
T2F= T2F? T2F=x
T2F? (see Description
T2F* of Arguments)
T2F#
TTC= TTC? TTC=x
TTC? (see Description
TTC* of Arguments)
TTC#