B.3.3 Interface Configuration Commands - Comtech EF Data SNM-1001L Installation And Operation Manual

SNM-1001L Satellite Modem
Remote Control Operation
Reed- Command:
Solomon Response:
Interleave Status:
Value Response:
RX 8PSK 2/3 Command:
IESS-310 Response:
Operation Status:
Response:
LNB Power Command:
Response:
Status:
Response:
LNB Voltage Command:
Response:
Status:
Response:
LNB Command:
Reference Response:
Enable Status:
Response:
LNB Power Command:
Monitor Low Response:
Current Status:
Threshold Response:
LNB Power Command:
Monitor High Response:
Current Status:
Threshold Response:

B.3.3 Interface Configuration Commands

Interface Command:
Transmit Response:
Overhead Status:
Type Response:
Interface Command:
Receive Response:
Overhead Status:
Type Response:
TX Driver Command:
Type Response:
Status:
Response:
RX Driver Command:
Type Response:
Status:
Response:
Transmit Command:
Clock Response:
Status:
Response:
External Command:
Clock- Response:
Reference Status:
Frequency Response:
Transmit Command:
Clock Response:
Phase Status:
Response:
Buffer Clock Command:
Response:
Status:
Response:
<add/RRSI_xx'cr'
>add/RRSI_xx'cr''lf']
<add/RRSI_'cr'
>add/RRSI_xx'cr''lf']
<add/R310_xxx'cr'
>add/R310_xxx'cr''lf']
<add/R310_'cr'
>add/R310_xxx'cr''lf']
<add/LNB_xxx'cr'
>add/LNB_xxx'cr''lf']
<add/LNB_'cr'
>add/LNB_xxx'cr''lf']
<add/LNBV_xxx'cr'
>add/LNBV_xxx'cr''lf']
<add/LNBV_'cr'
>add/LNBV_xxx'cr''lf']
<add/LNBR_xxx'cr'
>add/LNBR_xxx'cr''lf']
<add/LNBR_'cr'
>add/LNBR_xxx'cr''lf']
<add/LNBL_xxx'cr'
>add/LNBL_xxx'cr''lf']
<add/LNBL_'cr'
>add/LNBL_xxx'cr''lf']
<add/LNBH_xxx'cr'
>add/LNBH_xxx'cr''lf']
<add/LNBH_'cr'
>add/LNBH_xxx'cr''lf']
<add/ITOT_xxxxx'cr'
>add/ITOT_xxxxx'cr''lf']
<add/ITOT_'cr'
>add/ITOT_xxxxx'cr''lf']
<add/IROT_xxxxx'cr'
>add/IROT_xxxxx'cr''lf']
<add/IROT_'cr'
>add/IROT_xxxxx'cr''lf']
<add/TXDR_xxxxx'cr'
>add/TXDR_xxxxx'cr''lf']
<add/TXDR_'cr'
>add/TXDR_xxxxx'cr''lf']
<add/RXDR_xxxxx'cr'
>add/RXDR_xxxxx'cr''lf']
<add/RXDR_'cr'
>add/RXDR_xxxxx'cr''lf']
<add/TC_xxx'cr'
>add/TC_xxx'cr''lf']
<add/TC_'cr'
>add/TC_xxx'cr''lf']
<add/ERF_nnnnn.n'cr'
>add/ERF_nnnnn.n'cr''lf']
<add/ERF_'cr'
>add/ERF_nnnnn.n'cr''lf']
<add/TCP_xxxx'cr'
>add/TCP_xxxx'cr''lf']
<add/TCP_'cr'
>add/TCP_xxxx'cr''lf']
<add/BC_xxx'cr'
>add/BC_xxx'cr''lf']
<add/BC_'cr'
>add/BC_xxx'cr''lf']
Where: xx = 4, 8, or 16.
Where: xxx = ON or OFF.
Where: xxx = ON or OFF.
Where: xxx = 13,18, or 24 Volts
Where: xxx = ON or OFF.
Where: xxx = 0 to 500 in 1 mA steps
Where: xxx = 0 to 500 in 1 mA steps
Where: xxxxx = NONE or AUPC.
Where: xxxxx = NONE or AUPC.
Where: xxxxx = V35, RS422, or RS232.
Where: xxxxx = V35, RS422, or RS232.
Where: xxx = INT (internal SCT clock), EXT
(external TX terrestrial clock), REF (external
clock-reference frequency).
Where: nnnnn.n = 8.0 to 10000.0 (external clock
frequency in kHz).
Where: xxxx = NRM (normal clock phasing), INV
(inverted clock phasing), AUTO (automatic clock
phasing).
Where: xxx = INT (internal SCT clock), EXT
(external TX terrestrial clock), SAT (receive
satellite clock), REF (external clock-reference
frequency), INS (insert clock).
B–9
Revision 1
MN/SNM1001L.IOM