Create A Maintenance Association; Create Maintenance Points; Create A Maintenance End Point - Dell Force10 C150 Configuration Manual

Ftos configuration guide ftos 8.4.2.7 e-series terascale, c-series, s-series (s50/s25)
Hide thumbs Also See for Force10 C150:
Table of Contents

Advertisement

Create a Maintenance Association

A Maintenance Association MA is a subdivision of an MD that contains all managed entities
corresponding to a single end-to-end service, typically a VLAN. An MA is associated with a VLAN ID.
Task
Create maintenance association.

Create Maintenance Points

Domains are comprised of logical entities called Maintenance Points. A maintenance point is a interface
demarcation that confines CFM frames to a domain. There are two types of maintenance points:
Maintenance End Points (MEPs): a logical entity that marks the end-point of a domain
Maintenance Intermediate Points (MIPs): a logical entity configured at a port of a switch that
constitutes intermediate points of an Maintenance Entity (ME). An ME is a point-to-point relationship
between two MEPs within a single domain.
These roles define the relationships between all devices so that each device can monitor the layers under its
responsibility.

Create a Maintenance End Point

A Maintenance End Point (MEP) is a logical entity that marks the end-point of a domain. There are two
types of MEPs defined in 802.1ag for an 802.1 bridge:
Up-MEP: monitors the forwarding path internal to an bridge on the customer or provider edge; on
Dell Force10 systems the internal forwarding path is effectively the switch fabric and forwarding
engine.
Down-MEP: monitors the forwarding path external another bridge.
Configure Up- MEPs on ingress ports, ports that send traffic towards the bridge relay. Configure
Down-MEPs on egress ports, ports that send traffic away from the bridge relay.
Task
Create an MEP.
Display configured MEPs and
MIPs.
84
|
802.1ag
Command Syntax
service name vlan vlan-id
Command Syntax
ethernet cfm mep
up-mep | down-mep
{
ma-name name
level
}
mepid
Range: 1-8191
show ethernet cfm maintenance-points local
domain
}
{
name
mep-id
mep
mip
[
|
Command Mode
ECFM DOMAIN
Command Mode
|
INTERFACE
]
EXEC Privilege

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents