Implementation Information
•
Since the S-Series has a single MAC address for all physical/LAG interfaces, only one MEP is allowed
per MA (per VLAN or per MD level).
Configure CFM
Configuring CFM is a five-step process:
1. Configure the ecfmacl CAM region using the
Sub-partitions.
2.
Enable Ethernet
3.
Create a Maintenance
4.
Create a Maintenance
5.
Create Maintenance
6. Use CFM tools:
a
Continuity Check Messages on page 87
b
Loopback Message and Response on page 88
c
Linktrace Message and Response on page 88
Related Configuration Tasks
•
Enable CFM SNMP Traps. on page 90
•
Display Ethernet CFM Statistics on page 91
82
|
802.1ag
CFM. See page 83.
Domain. See page 83.
Association. See page 84.
Points. See page 84.
cam-acl
command. See
Configure Ingress Layer 2 ACL