Dell Force10 C150 Configuration Manual page 101

Frame Errors per Second
Task
Specify the high threshold value for
frame errors, or disable the high
threshold.
Specify the low threshold for frame
errors.
Specify the time period for frame
errors per second condition.
Frame Errors per Frame Period
Task
Specify the high threshold value for
frame errors per frame period, or
disable the high threshold.
Specify the low threshold for frame
errors per frame period.
Specify the frame period for frame
errors per frame period condition.
Error Seconds per Time Period
Task
Specify the high threshold value for
frame error seconds per time period, or
disable the high threshold.
Specify the low threshold for frame
error seconds per time period.
Command Syntax
ethernet oam link-monitor frame threshold high
none
{ frames | }
Range: 1-65535
Default: None
ethernet oam link-monitor frame threshold low frames
Range: 0-65535
Default: 1
ethernet oam link-monitor frame window milliseconds
Range: 10-600 milliseconds
Default: 100 milliseconds
Command Syntax
ethernet oam link-monitor frame-period threshold
high none
{ | }
frames
Range: 1-65535
Default: None
ethernet oam link-monitor frame-period threshold low
frames
Range: 0-65535
Default: 1
ethernet oam link-monitor frame-period window
milliseconds
Range: 1-65535 (times 10,000 frames)
Default: 1000 (10 million frames)
Command Syntax
ethernet oam link-monitor frame-seconds threshold
high none
{ | }
milliseconds
Range: 1-900
Default: None
ethernet oam link-monitor frame-seconds threshold
low milliseconds
Range: 1-900
Default: 1
Command Mode
INTERFACE
INTERFACE
INTERFACE
Command Mode
INTERFACE
INTERFACE
INTERFACE
Command Mode
INTERFACE
INTERFACE
802.3ah | 101