Snmp Traps - Dell Force10 S4810P Reference Manual

SNMP Traps

This chapter lists the traps sent by the Dell Force10 operating software (FTOS). Each trap is listed by the fields Message
ID, Trap Type, and Trap Option.
Message ID
COLD_START
%SNMP-5-SNMP_COLD_START: SNMP COLD_START trap sent.
WARM_START
COPY_CONFIG_COMPLETE
SNMP Copy Config Command Completed
LINK_DOWN
%IFA-1-PORT_LINKDN: changed interface state to
down:%d
LINK_UP
%IFA-1-PORT_LINKUP: changed interface state to up:
%d
AUTHENTICATION_FAIL
%SNMP-3-SNMP_AUTH_FAIL: SNMP Authentication
failed.Request with invalid community string.
EGP_NEIGHBOR_LOSS
OSTATE_DOWN
%IFM-1-OSTATE_DN: changed interface state to down:
%s
%IFM-5-CSTATE_DN:Changed interface Physical state
to down: %s
OSTATE_UP
%IFM-1-OSTATE_UP: changed interface state to up:%s
%IFM-5-CSTATE_UP: Changed interface Physical state
to up: %s
RMON_RISING_THRESHOLD
%RPM0-P:CP %SNMP-4-RMON_RISING_THRESHOLD: RMON
rising threshold alarm from SNMP OID <oid>
RMON_FALLING_THRESHOLD
%RPM0-P:CP %SNMP-4-RMON_FALLING_THRESHOLD: RMON
falling threshold alarm from SNMP OID <oid>
RMON_HC_RISHING_THRESHOLD
Trap Type Trap Option
SNMP COLDSTART
SNMP WARMSTART
SNMP NONE
SNMP LINKDOWN
SNMP LINKUP
SNMP AUTH
SNMP NONE
SNMP LINKDOWN
SNMP LINKUP
SNMP NONE
SNMP NONE
SNMP NONE
50
1513