To return to the default values, use the no logging history command.
Parameters
level
Defaults
warnings or 4
Command Modes
CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command
Usage
When you configure the snmp-server trap-source command, the system messages
Information
logged to the history table are also sent to the SNMP network management station.
Related
show logging
Commands
logging history size
Specify the number of messages stored in the FTOS logging history table.
C-Series, E-Series, S-Series, Z-Series
Syntax
logging history size size
To return to the default values, use the no logging history size command.
Parameters
size
Defaults
1 message
Command Modes
CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command
1504
Indicate a value from 0 to 7 or enter one of the following equivalent
words: emergencies, alerts, critical, errors,
warnings, notifications, informational, or
debugging. The default is 4 or warnings.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
– displays information logged to the history buffer.
Indicate a value as the number of messages to be stored. The range
is 0 to 500. The default is 1 message.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.