Show Storm-Control Multicast - Dell Force10 S4810P Reference Manual

show storm-control multicast

Display the storm control multicast configuration.
C-Series, S-Series, Z-Series, S4810
Syntax show storm-control multicast [interface]
Parameters
interface
Defaults none
Command Modes
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 7.6.1.0
Example
FTOS#show storm-control multicast gigabitethernet 1/0
Multicast storm control configuration
Interface
-----------------------------------------
Gi 1/0
FTOS#
(OPTIONAL) Enter one of the following interfaces to display the
interface specific storm control configuration:
•
•
•
•
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Direction
Ingress
For Fast Ethernet, enter the keyword Fastethernet
followed by the slot/port information.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/ port information.
Packets/Second
5
1531