Upload System-Dump - Extreme Networks ExtremeWare Command Reference Manual

upload system-dump

upload system-dump
upload system-dump [<ip address>]
Description
This command transfers a system dump to an IP address.
Syntax Description
ip address Specifies the IP address to which to transfer a system dump.
Default
N/A.
Usage Guidelines
If you do not specify an IP address, the configured system-dump server IP address is used.
Example
The following command transfers a system dump to 10.10.10.1:
upload system-dump 10.10.10.1 3
History
This command was first available in ExtremeWare 6.2.2.
Platform Availability
This command is available on platforms with an Ethernet management port.
ExtremeWare Software 7.3.0 Command Reference Guide 2235