Extreme Networks ExtremeWare Command Reference Manual page 2228

Hide thumbs Also See for ExtremeWare:

Table of Contents

Troubleshooting Commands

This command also displays the output from internal debug commands. This command disables the

CLI paging feature.

This information can be useful for your technical support representative if you experience a problem.

Depending on the software version running on your switch, additional or different show command

output is displayed.

The following command displays all the show command output on the switch:

show tech-support all

This command was first available in ExtremeWare 6.1.9.

This command was modified to capture the

command output in ExtremeWare 6.22.

show ipmc fdb

This command was modified to provide the

keywords in ExtremeWare 7.3.0

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0