Show Diagnostics Slot Fdb - Extreme Networks ExtremeWare Command Reference Manual

Troubleshooting Commands

show diagnostics slot fdb

show diagnostics slot <slot-number> fdb {<mac_address> | vlan <vlan name> |
tls-tunnel <tunnel_name>}
Description
Displays the MAC cache for a specific MPLS module.
Syntax Description
slot number
mac_address
vlan name
tunnel_name
Default
By default, the entire MAC cache is displayed.
Usage Guidelines
This command displays the MAC cache for a specific MPLS module. By default, the entire MAC cache
is displayed. If you specify the <
displayed. Specifying the VLAN displays all MAC cache entries learned on the VLAN. Specifying the
TLS tunnel displays all MAC cache entries learned on the TLS tunnel. The MAC address, VLAN name,
and TLS tunnel name are displayed for each MAC cache entry.
Example
The following command displays the MAC cache entries learned on the VLAN test_1 for the MPLS
module in slot 2:
show diagnostics slot 2 fdb vlan test_1
History
This command was first available in an ExtremeWare IP Technology Services Release based on
ExtremeWare 6.1.8b12.
This command was subsequently updated in ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
2224
Specifies a slot.
Specifies the MAC cache entry.
Specifies a name of a VLAN.
Specifies a tunnel name.
parameter, only the matching MAC cache entry is
mac_address>
ExtremeWare Software 7.3.0 Command Reference Guide