Configure Vlan Delete Track-Lsp - Extreme Networks ExtremeWare Command Reference Manual

configure vlan delete track-lsp

configure vlan <vlan name> delete track-lsp [<lsp_name> | ipaddress
<ipaddress>/<masklength> | all]
Description
Disables LSP route tracking for an ESRP-enabled VLAN.
Syntax Description
vlan name
lsp_name
ipaddress
all
Default
N/A
Usage Guidelines
The
delete track
specify the
all
Example
The following command disables diagnostic failure tracking for VLAN esrp-1:
configure vlan esrp-1 delete track-lsp
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
ExtremeWare 7.7 Command Reference Guide
Specifies an ESRP-enabled VLAN name.
Specifies a LSP name.
Specifies the IP address of the route entry to be tracked.
Specifies all LSPs.
- command removes an LSP from ESRP tracking for the specified VLAN. If you
lsp
keyword, all configured LSPs are removed from ESRP tracking for the specified VLAN.
configure vlan delete track-lsp
2557