Table 6-4 Field Descriptions For The Show Rmon Command - Cisco 11503 - CSS Content Services Switch Administration Manual

Viewing RMON Information
The port_name variable is the name of the physical port (for example, ethernet-4).
Enter the port_name variable as a case-sensitive, unquoted text string.
To display the RFC 1757 32-bit statistics, enter show rmon-32 port_name.
To see a list of ports, enter:
# show rmon ?
To display t he extended RMON statistics for the Ethernet-4 port in the CSS ,
enter :
# show rmon ethernet-4
Table 6-4
Table 6-4
Field
Bytes
Packets
Broadcast Packets The total number of good received packets that were
Multicast Packets
CRC Alignment
Errors
Oversize Packets
Cisco Content Services Switch Administration Guide
6-28
lists and describes the fields in the show rmon command output.
Field Descriptions for the show rmon Command
Description
The total number of received bytes.
The total number of received packets (including bad
packets, broadcast packets, and multicast packets).
directed to the broadcast address. The number of broadcast
packets does not include multicast packets.
The total number of good received packets that were
directed to a multicast address. The number of multicast
packets does not include packets directed to the broadcast
address.
The total number of packets received that had a length
(excluding framing bits, but including FCS octets) from 64
and 1518 octets, but had an FCS Error, a bad Frame Check
Sequence (FCS) with an integral number of octets, or an
Alignment Error, a bad FCS with a non-integral number of
octets.
The total number of received packets that were longer than
1518 octets (excluding framing bits, but including FCS
octets) and were otherwise well formed.
Chapter 6 Configuring Remote Monitoring (RMON)
OL-5647-02