Show Redirect List Configuration - Dell S4820T Configuration Manual

Example: Applying a Redirect-list to an Interface
Dell(conf-if-te-1/1)#ip redirect-group test
Dell(conf-if-te-1/1)#ip redirect-group xyz
Dell(conf-if-te-1/1)#show config
!
interface TenGigabitEthernet 1/1
no ip address
ip redirect-group test
ip redirect-group xyz
shutdown
Dell(conf-if-te-1/2)#
Dell(conf-if-gi-1/1)#ip redirect-group test
Dell(conf-if-gi-1/1)#ip redirect-group xyz
Dell(conf-if-gi-1/1)#show config
!
interface GigabitEthernet 1/1
no ip address
ip redirect-group test
ip redirect-group xyz
shutdown
Dell(conf-if-te-1/2)#
In addition to supporting multiple redirect-lists in a redirect-group, multiple redirect-groups are
supported on a single interface. Dell Networking OS has the capability to support multiple groups on
an interface for backup purposes.

Show Redirect List Configuration

To view the configuration redirect list configuration, use the following commands.
1. View the redirect list configuration and the associated interfaces.
EXEC mode
show ip redirect-list redirect-list-name
2. View the redirect list entries programmed in the CAM.
EXEC mode
show cam pbr
show cam-usage
List the redirect list configuration using the show ip redirect-list redirect-list-name
command. The non-contiguous mask displays in dotted format (x.x.x.x). The contiguous mask
displays in /x format.
Dell#show ip redirect-list explicit_tunnel
IP redirect-list explicit_tunnel:
Defined as:
seq 5 redirect tunnel 1 track 1 tcp 155.55.2.0/24 222.22.2.0/24, Track 1
[up], Next-hop reachable (via Te 1/32)
seq 10 redirect tunnel 1 track 1 tcp any any, Track 1 [up], Next-hop
reachable (via Te 1/32)
seq 15 redirect tunnel 2 udp 155.55.0.0/16 host 144.144.144.144, Track 1
[up], Next-hop reachable (via Te 1/32)
734
Policy-based Routing (PBR)