Show Sflow Sampling - Dell Networking 7048 Reference Manual

Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
The following fields are displayed:
Poller Data
Source
Receiver Index
Poller Interval
Example
console# show sflow 1 polling
Poller
Data Source
-----------
Te1/0/1

show sflow sampling

Use the show sflow sampling command to display the sFlow sampling
instances created on the switch.
Syntax
rcvr-index
show sflow
interface-list
]
rcvr-index — The sFlow Receiver associated with the poller (Range: 1–8).
•
interface-list — The list of interfaces on which data is sampled.
•
Default Configuration
This command has no default configuration.
1574
Sflow Commands
The sFlowDataSource (unit/slot/port) for this sFlow sampler. This
agent will support Physical ports only.
The sFlowReceiver associated with this sFlow counter poller.
The number of seconds between successive samples of the counters
associated with this data source.
Receiver
Index
-------
1
sampling [{gigabitethernet | tengigabitethernet}
Poller
Interval
-------
0