About This Guide; Objectives; Audience; Document Conventions - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

About This Guide

Objectives

Audience

Document Conventions

Copyright © 2010, Juniper Networks, Inc.
Objectives on page xiii
Audience on page xiii
Document Conventions on page xiii
List of Technical Publications on page xv
Requesting Technical Support on page xvi
Network and Security Manager (NSM) is a software application that centralizes control
and management of your Juniper Networks devices. With NSM, Juniper Networks delivers
integrated, policy-based security and network management for all security devices.
Secure Access (SA) device is the next generation Secure Access SSL VPN appliances in
its leading market. It enables a solution tailoring to meet the remote and extranet access
requirements.
This guide provides the various steps to configure and manage Secure Access using NSM.
This guide also helps in understanding of how to configure basic and advanced NSM
functionality, including adding new devices, deploying new device configurations, updating
device firmware, viewing log information, and monitoring the status of Secure Access.
This guide is intended for the system administrators who are responsible for configuring
Secure Access and Secure Access Federal Information Processing Standards (FIPS).
Table 1 on page xiv defines notice icons used in this guide.
xiii