Filter - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
family iso
family mpls
Hierarchy Level
Release Information
Description
Default
1196
®
OS for EX Series Ethernet Switches, Release 10.3
filter input filter-name;
filter output filter-name;
policer input policer-name;
policer output policer-name;
rpf-check;
}
family iso {
address interface-address;
}
family mpls;
[edit interfaces interface-name unit logical-unit-number]
Statement introduced in Junos OS Release 9.0 for EX Series switches, including options
ethernet-switching , inet , and
Option introduced in Junos OS Release 9.3 for EX Series switches.
inet6
Options and introduced in Junos OS Release 9.5 for EX Series switches.
ccc mpls
Configure protocol family information for the logical interface on the switch.
Most standard Junos OS configuration statements are available in Junos OS for EX Series
switches. This topic lists standard Junos OS statements that you commonly use when
configuring protocol families for interfaces on EX Series switches as well as statements
that are used to configure protocol families only on switch interfaces. For information
about additional standard Junos OS statements that you can configure on interfaces,
see the Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/index.html
Access interfaces on EX2200, EX3200, EX4200, and EX4500 switches are set to
ethernet-switching by default. If you are going to change the family setting for an interface,
you might have to delete this default setting or any user-configured family setting before
you change the setting to another family type.
EX8200 switch interfaces do not have a default family setting.
You must configure a logical interface to be able to use the physical device.
iso .
Copyright © 2010, Juniper Networks, Inc.
.
family