Chapter 8
Industry-Standard Management Information Base
IP Address Translation Table
The IP address translation table contain the IP Address to physical address equivalences. Some
interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an
algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e.,
has zero entries.
ipNetToMediaTable OBJECT-TYPE
ipNetToMediaEntry OBJECT-TYPE
ipNetToMediaIfIndex OBJECT-TYPE
ipNetToMediaPhysAddress OBJECT-TYPE
ipNetToMediaNetAddress OBJECT-TYPE
OL-22523-01
SYNTAX Sequence of ipNetToMediaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
The IP Address Translation table used for mapping from IP addresses to physical addresses.
::= { ip 22 }
SYNTAX IpNetToMediaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
Each entry contains one IpAddress to physical address equivalence.
INDEX { ipNetToMediaIfIndex, ipNetToMediaNetAddress }
::= { ipNetToMediaTable 1 }
IpNetToMediaEntry ::=
SEQUENCE { ipNetToMediaIfIndex INTEGER, ipNetToMediaPhysAddress PhysAddress,
ipNetToMediaNetAddress IpAddress, ipNetToMediaType INTEGER }
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
The interface on which this entry's equivalence is effective. The interface identified by a particular
value of this index is the same interface as identified by the same value of ifIndex.
::= { ipNetToMediaEntry 1 }
SYNTAX PhysAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
The media-dependent physical address.
::= { ipNetToMediaEntry 2 }
Cisco Unified Communications Manager Managed Services Guide
RFC1213-MIB (MIB-II)
8-49