Cisco MCS-7825-H3-IPC1 Service Manual page 817

Chapter 8 Industry-Standard Management Information Base
SysApplPastRunEntry ::= SEQUENCE { sysApplPastRunIndex Unsigned32,
sysApplPastRunStarted DateAndTime, sysApplPastRunExitState INTEGER,
sysApplPastRunTimeEnded DateAndTime
sysApplPastRunIndex OBJECT-TYPE
SYNTAX Unsigned32 (1...ffffffffh)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Part of the index for this table. An integer matching the value of the removed sysApplRunIndex
corresponding to this row.
::= { sysApplPastRunEntry 1 }
sysApplPastRunStarted OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The date and time that the application was started.
::= { sysApplPastRunEntry 2 }
sysApplPastRunExitState OBJECT-TYPE
SYNTAX INTEGER { complete (1), failed (2), other (3) }
–
–
–
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The state of the application instance when it terminated. This value is based on an evaluation of the
running elements of an application and their Roles as defined by sysApplInstallElmtRole. An
application instance is said to have exited in a COMPLETE state and its entry is removed from the
sysApplRunTable and added to the sysApplPastRunTable when the agent detects that ALL elements
of an application invocation are no longer running. Most agent implementations will wait until a
second internal poll has been completed to give the system time to either restart partial failures or
to give all elements time to exit. A failed state occurs if, after the second poll, any elements continue
to run but one or more of the REQUIRED elements are no longer running.
All other combinations MUST be defined as OTHER.
::= { sysApplPastRunEntry 3 }
sysApplPastRunTimeEnded OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
OL-22523-01
complete (1)—normal exit at sysApplRunTimeEnded
failed (2)—abnormal exit
other (3)
Cisco Unified Communications Manager Managed Services Guide
SYSAPPL-MIB
8-13