Cisco MCS-7825-H3-IPC1 Service Manual page 733

Chapter 7 Cisco Management Information Base
SYNTAX SnmpAdminString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The device name assigned to the SIP Trunk Device. This name is assigned when a new SIP Trunk
device is added to the Cisco Unified CM.
::= { ccmSIPDeviceEntry 2 }
ccmSIPDevProductTypeIndex OBJECT-TYPE
SYNTAX CcmIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
A positive value of this index is used to identify the related product type entry in the
ccmProductTypeTable. A value of zero indicates that the index to the ccmProductTypeTable is
Unknown.
::= { ccmSIPDeviceEntry 3 }
ccmSIPDevDescription
OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
A description of the SIP Trunk device. This Description is given when the SIP Trunk device is
configured in the Cisco Unified CM.
::= { ccmSIPDeviceEntry 4 }
ccmSIPInTransportProtocolType OBJECT-TYPE
SYNTAX CcmSIPTransportProtocolType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Specifies the transport protocol type used by Cisco Unified CM for setting up incoming SIP call.
::= { ccmSIPDeviceEntry 7 }
ccmSIPInPortNumber OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Specifies the port number used by Cisco Unified CM for setting up incoming SIP call.
::= { ccmSIPDeviceEntry 8 }
OL-22523-01
Cisco Unified Communications Manager Managed Services Guide
CISCO-CCM-MIB
7-91