Cisco MCS-7825-H3-IPC1 Service Manual page 661

Chapter 7 Cisco Management Information Base
deviceInitiatedReset(8),
callManagerReset(9),
deviceUnregistered(10),
malformedRegisterMsg(11),
sccpDeviceThrottling(12),
keepAliveTimeout(13),
configurationMismatch(14),
callManagerRestart(15),
duplicateRegistration(16),
callManagerApplyConfig(17),
deviceNoResponse(18),
emLoginLogout(19),
emccLoginLogout(20),
energywisePowerSavePlus(21),
callManagerForcedRestart(22),
sourceIPAddrChanged(23),
sourcePortChanged(24),
registrationSequenceError(25),
invalidCapabilities(26),
fallbackInitiated(28),
deviceSwitch(29)
}
CcmDeviceStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
This syntax is used to identify the registration status of a device with the local Cisco Unified CM.
The status is as follows:
–
–
–
–
–
SYNTAX INTEGER { unknown (1), registered (2), unregistered (3), rejected (4),
partiallyregistered (5)}
CcmPhoneProtocolType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
OL-22523-01
unknown—The registration status of the device is unknown
registered—The device has successfully registered with the local Cisco Unified CM.
unregistered—The device is no longer registered with the local Cisco Unified CM.
rejected—Registration request from the device was rejected by the local Cisco Unified CM.
partiallyregistered—At least one but not all of the lines are successfully registered to the Cisco
Unified CM. Applicable only to SIP Phones.
Cisco Unified Communications Manager Managed Services Guide
CISCO-CCM-MIB
7-19