Quality Report Alarm Configuration Information; Sip Device Table - Cisco MCS-7825-H3-IPC1 Service Manual

Chapter 7 Cisco Management Information Base
ccmVMailDevDirNumIndex OBJECT-TYPE
ccmVMailDevDirNum OBJECT-TYPE

Quality Report Alarm Configuration Information

ccmQualityReportAlarmEnable OBJECT-TYPE

Sip Device Table

ccmSIPDeviceTable OBJECT-TYPE
OL-22523-01
::= { ccmVoiceMailDeviceDirNumTable 1 }
CcmVoiceMailDeviceDirNumEntry ::= SEQUENCE {
ccmVMailDevDirNumIndexCcmIndex,
ccmVMailDevDirNum SnmpAdminString
}
SYNTAX CcmIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
An arbitrary integer, selected by the local system, that identifies a Directory Number of a Voice
Messaging Device.
::= { ccmVoiceMailDeviceDirNumEntry 1 }
SYNTAX SnmpAdminString (SIZE(0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The Directory Number of the Voice Messaging Device.
::= { ccmVoiceMailDeviceDirNumEntry 2 }
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Allows the generation of the quality report alarm.
true(1): Enabling this object will allow the Cisco Unified CM agent to generate the
ccmQualityReport alarm. This is the default value.
false(2): Disabling this object will stop the generation of the ccmQualityReport alarm by the
Cisco Unified CM agent.
DEFVAL { true }
::= { ccmQualityReportAlarmConfigInfo 1 }
SYNTAX SEQUENCE OF CcmSIPDeviceEntry
Cisco Unified Communications Manager Managed Services Guide
CISCO-CCM-MIB
7-89