Cisco MCS-7825-H3-IPC1 Service Manual page 70

Cisco Unified Communications Manager, Release 8.0(1)
Alarm Name
CMVersionMismatch
ConflictingDataIE
DbInfoCorrupt
DbInfoError
DbInfoTimeout
DbInsertValidatedDIDFailure
EndPointRegistered
EndPointResetInitiated
EndPointRestartInitiated
EndPointTransientConnection
EndPointUnregistered
FirewallMappingFailure
IMEQualityAlertEntry
IMEQualityAlertExit
IMEDistributedCacheInactive
IMEOverQuota
InsufficientFallbackIdentifiers
InvalidSubscription
RouteRemoved
InvalidCredentials
PublicationRunCompleted
PublishFailed
PublishFailedOverQuota
RejectedRoutes
TCPSetupToIMEFailed
Cisco Unified Communications Manager Managed Services Guide
2-28
Description
One or more Unified CM nodes in a cluster are running different
Cisco CallManager versions.
A call has been rejected because the incoming PRI/BRI Setup
message had an invalid IE.
Database information returned is corrupt. Database configuration
error was encountered.
Error in the database information retrieved. Database
configuration error was encountered.
Database Information request timed out. Timeout was
encountered while trying to read database configuration.
The Insertion of an IME provided E.164 DID has failed. A failure
occurred attempting to insert a Cisco Unified Active Link learned
DID.
This alarm occurs when a device is successfully registered with
Cisco Unified Communications Manager.
This alarm occurs when a device is reset via the Reset button in
Cisco Unified CM Administration.
Device restart initiated or Apply Config initiated on the specified
device.
End point transient connection attempt.
An endpoint that has previously registered with Cisco Unified
Communications Manager has unregistered.
Firewall unreachable.
IME call quality problem.
IME call quality problem cleared.
Inactive IME distributed cache.
Each IME server has a fixed quota on the total number of DIDs
it can write into the IME distributed cache.
Cannot allocate fallback identifier.
A message has been received from an IME server that contains a
subscription identifier that is not handled by this node.
Route is removed automatically.
Credential Failure to IME server.
Completion of publication of published DID patterns.
Unified CM attempted to store a number into the IME distributed
cache, but the attempt failed. This is typically due to a transient
problem in the IME distributed cache.
Each IME server has a fixed quota on the total number of DIDs
it can write into the IME distributed cache.
Rejected route due to Untrusted status.
Connection Failure to IME server.
Chapter 2 New and Changed Information
OL-22523-01