Cisco MCS-7825-H3-IPC1 Service Manual page 898

HOST-RESOURCES-MIB
::= { hrSWRunEntry 2 }
hrSWRunID OBJECT-TYPE
SYNTAX ProductID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The product ID of this running piece of software.
::= { hrSWRunEntry 3 }
hrSWRunPath OBJECT-TYPE
SYNTAX InternationalDisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
A description of the location on long-term storage (e.g. a disk drive) from which this software was
loaded.
::= { hrSWRunEntry 4 }
hrSWRunParameters OBJECT-TYPE
SYNTAX InternationalDisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
A description of the parameters supplied to this software when it was initially loaded.
::= { hrSWRunEntry 5 }
hrSWRunType OBJECT-TYPE
SYNTAX INTEGER { unknown(1), operatingSystem(2), deviceDriver(3), application(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The type of this software.
::= { hrSWRunEntry 6 }
hrSWRunStatus OBJECT-TYPE
SYNTAX INTEGER { running(1), runnable(2),-- waiting for resource -- (i.e., CPU, memory, IO)
notRunnable(3), -- loaded but waiting for event invalid(4) -- not loaded }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
The status of this running piece of software. Setting this value to invalid(4) shall cause this oftware
to stop running and to be unloaded. Sets to other values are not valid.
Cisco Unified Communications Manager Managed Services Guide
8-94
Chapter 8 Industry-Standard Management Information Base
OL-22523-01