Cisco MCS-7825-H3-IPC1 Service Manual page 692

CISCO-CCM-MIB
cisco269X(41),
cisco1760(42),
cisco1751(43),
ccmGatewayDescription OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The description attached to the gateway device.
::= { ccmGatewayEntry 4 }
ccmGatewayStatus OBJECT-TYPE
SYNTAX CcmDeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The status of the gateway. The Gateway status changes from Unknown to Registered when the
Gateway registers itself with the local Cisco Unified CM.
::= { ccmGatewayEntry 5 }
ccmGatewayDevicePoolIndex OBJECT-TYPE
SYNTAX CcmIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
A positive value of this index is used to identify the Device Pool to which this Gateway entry
belongs. A value of zero indicates that the index to the Device Pool table is Unknown.
::= { ccmGatewayEntry 6 }
ccmGatewayInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
This object identifies the IP address type of the Gateway device. The value of this object is
'unknown(0)' if the IP address of a Gateway device is not available.
::= { ccmGatewayEntry 7 }
ccmGatewayInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
Cisco Unified Communications Manager Managed Services Guide
7-50
Chapter 7 Cisco Management Information Base
OL-22523-01