Cisco MCS-7825-H3-IPC1 Service Manual page 71

Chapter 2 New and Changed Information
Alarm Name
TLSConnectionToIMEFailed
New SAF and CCD Alarms
LostConnectionToSAFForwarder
SAFForwarderError
SAFUnknownService
SAFPublishRevoke
SAFResponderError
DuplicateLearnedPattern
CCDIPReachableTimeOut
CCDPSTNFailOverDurationTime
Out
CCDPSTNFailOverDurationTime
Out
New Alarms in External Call Control
ConnectionFailureToPDP
ConnectionToPDPInService
AwaitingResponseFromPDPTimeo
ut
ErrorParsingResponseFromPDP
ErrorParsingDirectiveFromPDP
FailureResponseFromPDP
CallAttemptBlockedByPolicy
FailedToFulfillDirectiveFromPDP
DigitAnalysisTimeoutAwaitingRes
ponse
Changed Alarms in Call Manager Catalog
The following CallManager alarms are changed in the alarm catalog:
OL-22523-01
Description
TLS Failure to IME service.
Connection to the SAF Forwarder has been lost.
SAF Forwarder error response sent to Unified CM.
Unified CM does not recognize the service ID in a publish revoke
or withdraw message.
A CLI command revoked the publish action for the specified
service or subservice ID.
This is raised when SAF forwarder doesn't know the transaction
ID within SAF response from this Cisco Unified CM.
This alarm occurs when CCD requesting service received a
duplicate Hosted DN.
CCD Requesting Service IP Reachable Duration times out.
The internal limit on PSTN failover has expired.
CCD has reached the maximum number of learned patterns
allowed.
A connection request from Unified CM to the policy decision
point (PDP) failed.
A connection was successfully established between Cisco
Unified Communications Manager (Unified CM) and the policy
decision point (PDP).
Cisco Unified Communication Manager timed out waiting for the
routing response from the policy decision point.
Cisco Unified Communications Manager failed to parse one or
multiple optional elements or attributes in the call routing
response from the policy decision point.
Cisco Unified Communications Manager (Unified CM) failed to
parse the call routing directive or the diversion destination in the
call routing response from the policy decision point (PDP).
The policy decision point (PDP) returned a 4xx (client) or 5xx
(server) status code in the HTTP response.
A call was attempted but blocked or rejected by the policy
decision point (PDP).
Cisco Unified Communications Manager cannot fulfill the call
routing directive returned by the PDP.
Cisco Unified Communications Manager sent a routing request
to the policy decision point but the request timed out without a
response.
Cisco Unified Communications Manager Managed Services Guide
Cisco Unified Communications Manager, Release 8.0(1)
2-29