Cisco MCS-7825-H3-IPC1 Service Manual page 678

CISCO-CCM-MIB
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The name of the user of the phone. When the phone is not in use, the name would refer to the last
known user of the phone.
::= { ccmPhoneEntry 5 }
ccmPhoneStatus OBJECT-TYPE
SYNTAX CcmDeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The status of the phone. The status of the Phone changes from Unknown to registered when it
registers itself with the local Cisco Unified CM.
::= { ccmPhoneEntry 7 }
ccmPhoneTimeLastRegistered OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The time when the phone last registered with the Cisco Unified CM.
::= { ccmPhoneEntry 8 }
ccmPhoneE911Location OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The E911 location of the phone.
::= { ccmPhoneEntry 9 }
ccmPhoneLoadID OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
This object identifies the configured load ID for the phone device.
::= { ccmPhoneEntry 10 }
ccmPhoneDevicePoolIndex OBJECT-TYPE
SYNTAX CcmIndexOrZero
MAX-ACCESS read-only
Cisco Unified Communications Manager Managed Services Guide
7-36
Chapter 7 Cisco Management Information Base
OL-22523-01