Maliciouscalltrace; Medialistexhausted - Cisco MCS-7825-H3-IPC1 Service Manual

Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Table 6-42
Value
Threshold
Duration
Frequency
Schedule
Enable E-mail
Trigger Alert Action Default

MaliciousCallTrace

This indicates that a malicious call exists in Cisco Unified Communications Manager. The malicious call
identification (MCID) feature gets invoked.
Table 6-43
Value
Enable Alert
Severity
Enable/Disable this
alert on the
following servers
Threshold
Duration
Frequency
Schedule
Enable E-mail
Trigger Alert Action Default

MediaListExhausted

This alert occurs when the number of MediaListExhausted events exceeds the configured threshold
during the configured time interval. This indicates that all available media resources that are defined in
the media list are busy. The default specifies 0 within 60 minutes.
Table 6-44
Value
Enable Alert
Severity
OL-22523-01
Default Configuration for the LowTFTPServerHeartbeatRate RTMT Alert (continued)
Default Configuration
Trigger alert when following condition met:
TFTP server heartbeat rate below 24 beats per minute
Trigger alert immediately
Trigger alert on every poll
24 hours daily
Selected
Default Configuration for the MaliciousCallTrace RTMT Alert
Default Configuration
Selected
Critical
Enabled on listed servers
Trigger alert when following condition met:
Malicious call trace generated
Trigger alert immediately
Trigger alert on every poll
24 hours daily
Selected
Default Configuration for the MediaListExhausted RTMT Alert
Default Configuration
Selected
Warning
Cisco Unified Communications Manager Managed Services Guide
Preconfigured CallManager Alarm Notifications
6-45