Logpartitionlowwatermarkexceeded - Cisco MCS-7825-H3-IPC1 Service Manual

Preconfigured System Alarm Notifications
Note
Table 6-10
Alert.
Table 6-10
Value
Enable Alert
Severity
Enable/Disable this
alert on the
following servers
Threshold
Duration
Frequency
Schedule
Enable E-mail
Trigger Alert Action Default

LogPartitionLowWaterMarkExceeded

This alert occurs when the LogPartitionLowWaterMarkExceeded event gets generated. This indicates
that the percentage of used disk space in the log partition exceeded the configured low water mark.
Note
Table 6-11
Alert.
Table 6-11
Value
Enable Alert
Severity
Enable/Disable this
alert on the
following servers
Cisco Unified Communications Manager Managed Services Guide
6-24
LPM may delete files that you want to keep. You should act immediately when you receive the
LogPartitionHighWaterMarkExceeded alert.
provides the default configuration for the LogPartitionHighWaterMarkExceeded RTMT
Default Configuration for the LogPartitionHighWaterMarkExceeded
RTMT Alert
Default Configuration
Selected
Critical
Enabled on listed servers
Trigger alert when following condition met:
Log Partition Used Disk Space Exceeds High Water Mark (95%)
Trigger alert immediately
Trigger alert on every poll
24 hours daily
Selected
Be aware that this alert is an early warning. The administrator should start freeing up disk space.
Using RTMT/TLC, you can collect trace/log files and delete them from the server. The
administrator should adjust the number of trace files that are kept to avoid hitting the low water
mark again.
provides the default configuration for the LogPartitionLowWaterMarkExceeded RTMT
Default Configuration for the LogPartitionLowWaterMarkExceeded RTMT Alert
Default Configuration
Selected
Critical
Enabled on listed servers
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
OL-22523-01