Smdicmderror - Cisco MCS-7825-H3-IPC1 Service Manual

Notice-Level Alarms
Severity
Notice
Routing List
SDL
SDI
Sys Log
Event Log
Parameters
SIP Trunk Name(String)
Available remote peers for this SIP trunk(String)
Recommended Action
Notification purpose only; no action is required.

SMDICmdError

CMI receives an invalid incoming SMDI message.
There are two kinds of incoming messages that Cisco Unified Communications Manager can accept from
the voice messaging system; they are OP:MWI(SP)nnnnnnn!(D) and RMV:MWI(SP)nnnnnnn!(D)
(where:nnnnnnnnnn = station number (can be 7 or 10 digits), (D) = End Of Transmission, (SP) = space).
The first message activates the message waiting indicator (MWI). The second deactivates the message
waiting indicator. CMI triggers this alarm if the received MWI message does not have one of the
acceptable formats as described.
History
Cisco Unified Communications
Release
8.0(1)
Cisco Unified Serviceability Alarm Definition Catalog
CMIAlarmCatalog/CMI
Severity
NOTICE
Routing List
Event Log
SDI
Parameter(s)
Invalid SMDI command(String)
Cisco Unified Communications Manager Managed Services Guide
6-320
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Action
Name changed from kSMDICmdError.
OL-22523-01