Ctimaxconnectionreached - Cisco MCS-7825-H3-IPC1 Service Manual

Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Routing List
SDL
SDI
Sys Log
Event Log
Parameter(s)
Unified CM Version(String)
IPAddress(String)
IPv6Address(String)
Recommended Action
Verify that the correct version of the application is being used. If you are not sure of the correct version,
contact the application vendor and upgrade the JTAPI/TSP to the version provided by Cisco Unified
Communications Manager. JTAPI/TSP plugins are available in Cisco Unified CM Administration
(Application > Plugins).

CtiMaxConnectionReached

Maximum number of CTI connections has been reached, no new connection will be accepted unless an
existing connection is closed.
History
Cisco Unified Communications
Release
8.0(1)
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CtiManager
Severity
WARNING
Routing List
SDL
SDI
Sys Log
Event Log
Recommended Action
Check the CTI Manager service parameter Maximum CTI Connections for the maximum number of
connections. Carefully, consider increasing the service parameter value or disconnecting CTI
applications that are unnecessary. Refer to Unified CM Solution Reference Network Design document
in www.cisco.com
supported by CTI.
OL-22523-01
Action
Name changed from kCtiMaxConnectionReached.
based on the version you are using for maximum number of applications and devices
Cisco Unified Communications Manager Managed Services Guide
Warning-Level Alarms
6-213