Hp Status Messages - Cisco MCS-7825-H3-IPC1 Service Manual

Hewlett Packard MIBs
Table 9-12 HP MIBs (continued)
MIB
CPQTHRSH-MIB
CPQHOST-MIB
CPQIDE-MIB
CPQNIC-MIB

HP Status Messages

Table 9-13
responses.
Table 9-13 HP Hardware Status Messages, MIBs and OIDs, MIB Object Names and Clearing Values, and
Object Responses
Cisco Unified CM Release 6.x
MCS-78xx Status MIB and OID
1
Logical Drive CPQIDA-MIB
1.3.6.1.4.1.232.3.2.3.1.1.4
Cisco Unified Communications Manager Managed Services Guide
9-20
OID
1.3.6.1.4.1.232.10
1.3.6.1.4.1.232.11
1.3.6.1.4.1.232.14
1.3.6.1.4.1.232.18
lists status messages, MIBs and OIDs, MIB object names and clearing values, and object
MIB Object Name and
Clearing Value
cpqDaLogDrvStatus
Clearing Value = 2
Chapter 9 Vendor-Specific Management Information Base
Function
Provides alarm threshold management
Provides operating system information
Provides IDE (CD-ROM) drive status/events
Provides Network Interface Card (NIC)
status/events
Object Response
The logical drive can be in one of the
following states:
• Ok (2) Indicates that the logical
drive is in normal operation mode.
Failed (3) Indicates that more
•
physical drives have failed than the
fault tolerance mode of the logical
drive can handle without data loss.
Unconfigured (4) Indicates that the
•
logical drive is not configured.
Recovering (5) Indicates that the
•
logical drive is using Interim
Recovery Mode. In Interim
Recovery Mode, at least one
physical drive has failed, but the
logical drive's fault tolerance mode
lets the drive continue to operate
with no data loss.
Ready Rebuild (6) Indicates that
•
the logical drive is ready for
Automatic Data Recovery. The
physical drive that failed has been
replaced, but the logical drive is
still operating in Interim Recovery
Mode.
OL-22523-01