Sipstarted - Cisco MCS-7825-H3-IPC1 Service Manual

Notice-Level Alarms
Enum Definitions - Reason Code
Value
1
2
Recommended Action
Notification purposes; examine the information and perform the recommended actions in the
SIPNormalizationScriptError alarm, which should have been issued before this alarm.

SIPStarted

Cisco CallManager is ready to handle calls for the indicated SIP device. This alarm does not indicate the
current state of the SIP device, only that Cisco CallManager is prepared to handle calls to or from the
SIP device.
History
Cisco Unified Communications
Release
8.0(1)
7.1
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Notice
Parameters
Device Name. [String]
IP Address [Optional]. [String]
Device type. [Optional] [Enum]
Device description [Optional]. [String]
Incoming Port Number. [UInt]
Cisco Unified Communications Manager Managed Services Guide
6-318
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Definition
ScriptResetDisabled—The system has automatically reset the script
three times within a 10 minute period due to script execution errors; on
the fourth occurrence of this error, Cisco Unified CM disabled the
script.
TrunkResetDisabled—The system has automatically reset the trunk
three times within a 10 minute period due to script execution errors; on
the fourth occurrence of this error, Cisco Unified CM disabled the
script.
Action
Severity changed from Informational to Notice.
•
Enum Definitions for InTransportType and OutTransportType
•
are updated.
IPV6Address parameter added.
OL-22523-01