Cisco MCS-7825-H3-IPC1 Service Manual page 78

Cisco Unified Communications Manager, Release 8.0(1)
Alarm Name
UnableToRegisterwithCallManagerService
UnableToSetorResetMWI
•
Alarm Name
ErrorChangeNotifyClientBlock
ErrorReadingInstalledRPMS
IDSEngineCritical
IDSEngineDebug
IDSReplicationInformation
•
Alarm Name
DRFBackupCompleted
DRFLocalDeviceError
DRFNoBackupTaken
DRFRestoreCompleted
•
Alarm Name
AdminPassword
authAdminLock
authExpired
authFail
authHackLock
authInactiveLock
authLdapInactive
authMustChange
authSuccess
credFullUpdateFailure
credFullUpdateSuccess
Cisco Unified Communications Manager Managed Services Guide
2-36
Description
CTI cannot communicate with Cisco CallManager
service to register supplementary service features.
An error occurred when setting the message waiting
indication (MWI) lamp.
DB Alarm Catalog—The following DB alarms are updated in the alarm catalog:
Alarm Changes
Changed severity level to Critical from Error.
Severity level is Error (3).
Changed severity level to Error from Critical.
Changed severity level to Informational from Debug.
Severity level is Informational.
DRF Alarm Catalog—The following new DRF alarms are added in the alarm catalog:
Alarm Changes
DRF backup completed successfully.
DRF unable to access local device.
A valid backup of the current system was not found after an
Upgrade, Migration, or Fresh Install.
DRF restore completed successfully.
IMS Alarm Catalog—The following IMS alarms are updated in the alarm catalog:
Alarm Changes
Severity level is Informational.
Severity level is Warning (4).
Added Routing List element and updated the parameter list.
Changed severity level from Notice to Warning.
Updated the parameter list.
Updated the parameter list.
Severity level is Warning (4).
• Parameter list is updated.
• Routing List element is added.
Severity level is Informational (6).
Severity level is Informational (6).
Severity level is Informational (6).
Chapter 2 New and Changed Information
OL-22523-01