Cisco MCS-7825-H3-IPC1 Service Manual page 418

Managed services guide
Table of Contents

Advertisement

Error-Level Alarms
Value
471
472
473
474
475
476
477
Cisco Unified Communications Manager Managed Services Guide
6-184
Chapter 6
Definition
**INFO LEVEL** SAF_BAD_CLIENT_HANDLE -
SAF_BAD_CLIENT_HANDLE - Unified CM sent the SAF Forwarder a
Register message (for KeepAlive purposes) or unregister message with the
mandatory CLIENT_HANDLE value, but the SAF Forwarder did not
recognize the client handle. Unified CM will attempt to reregister with the
SAF Forwarder without a client handle. This alarm is for informational
purposes only; no action is required.
**INFO LEVEL** SAF_VERSION_NUMBER_TOO_LOW - Unified CM
published a service (such as Hosted DN) whose version number is now lower
than when it was previously published to the SAF Forwarder. The service is
out of sync with the SAF Forwarder. Unified CM will republish the service
in an attempt to resynch with the SAF Forwarder. This alarm is for informa-
tional purposes only; no action is required.
**INFO LEVEL** SAF_UNKNOWN_SERVICE - Unified CM attempted
to unpublish a service from the SAF network but the SAF Forwarder does not
have a publish record for that service. This alarm is for informational
purposes only; no action is required.
**INFO LEVEL** SAF_UNREGISTERED - Unified CM attempted to
publish or subscribe to the SAF Forwarder, but Unified CM is not registered
with SAF Forwarder. Unified CM will automatically reregister with the SAF
Forwarder before attempting to publish or subscribe. This alarm is for infor-
mational purposes only; no action is required.
**INFO LEVEL** SAF_BAD_FILTER - Unified CM attempted to
subscribe to the SAF Forwarder with a filter that does not match any of the
SAF Forwarder's current filters. Unified CM will resend the subscribe
message with the appropriate filter value. This alarm is for informational
purposes only; no action is required.
SAF_UNKNOWN_SUBSCRIPTION - Unified CM sent a subscribe or un-
subscribe message to the SAF Forwarder but the message contained a Service
ID that was not familiar to the SAF Forwarder. Without a recognized Service
ID, Unified CM cannot subscribe to the SAF Forwarder. Recommended
action is to contact the Cisco Technical Assistance Center (TAC).
**INFO LEVEL** SAF_ALREADY_REGISTERED - Unified CM
attempted to register with the SAF Forwarder but SAF Forwarder indicates
that Unified CM is already registered. Unified CM will close and reopen the
TCP connection and send a new register request without a client handle to
SAF Forwarder. This alarm is for informational purposes only; no action is
required.
Cisco Unified Serviceability Alarms and CiscoLog Messages
OL-22523-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Unified communications manager 8.5(1)

Table of Contents