Unabletosetorresetmwi; Userinputfailure - Cisco MCS-7825-H3-IPC1 Service Manual

Warning-Level Alarms
Parameter(s)
Error Information(String)
Recommended Action
Try restarting the CMI service. If the problem persists, collect the system/application event logs and the
performance (perfmon) logs and report to Cisco Technical Assistance Center (TAC).

UnableToSetorResetMWI

An error occurred when setting the message waiting indication (MWI) lamp
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CtiManager
Severity
WARNING
Routing List
SDL
SDI
Sys Log
Event Log
Parameter(s)
Directory Number(String)
Recommended Action
The line issuing the request to set the MWI lamp on the target line might not have the proper
partitions/calling search space settings to allow it to reach the target line. Check the partitions and calling
search space of the line that is requesting to set MWI on the target line. The target line should be able to
receive a call from the line that is attempting to set MWI.

UserInputFailure

EMCC login failure due to invalid user input due to invalid user credentials or the credentials have
expired. Reason Code: 2—Authentication Error.
Cisco Unified Serviceability Alarm Definition Catalog
System/EMAlarmCatalog
Severity
W
arning(4)
Routing List
Sys Log
Event Log
Cisco Unified Communications Manager Managed Services Guide
6-292
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
OL-22523-01