Stationalarm; Stationconnectionerror - Cisco MCS-7825-H3-IPC1 Service Manual

Informational-Level Alarms
Severity
INFORMATIONAL
Routing List
SDI
Event Log
Recommended Action
No action required. This informational message indicates alarm SoftwareLicenseNotValid is cleared.

StationAlarm

A station device sent an alarm to Cisco Unified Communications Manager, which acts as a conduit from
the device to generate this alarm.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Informational (6)
Parameters
Protocol [String] TCP ProcessID [String] Device Text [String] Param1 [UInt] Param2 [UInt]
Recommended Action
Refer to the specific device type and information passed via this alarm to determine the appropriate
action.

StationConnectionError

Station device is closing its connection with Cisco Unified Communications Manager because of the
reason that is stated in this alarm.
History
Cisco Unified Communications
Release
8.0(1)
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Communications Manager Managed Services Guide
6-396
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Action
Reason Code[Enum] parameter added.
•
Enum Definitions for Reason Code table added.
•
OL-22523-01