Cisco MCS-7825-H3-IPC1 Service Manual page 700

CISCO-CCM-MIB
STATUS current
DESCRIPTION
The ccmPhoneFailedIndex value of the last entry that was added to the ccmPhoneFailedTable. This
value together with sysUpTime can be used by the manager applications to identify the new entries
in the ccmPhoneFailedTable since their last poll. This value need not be the same as the highest
index in the ccmPhoneFailedTable as the index could have wrapped around. The initial value of this
object is 0, which indicates that no entries have been added to this table. When the SNMP service
is restarted this value will be reset to 0.
::= { ccmGlobalInfo 28 }
ccmSystemVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The installed version of the local Cisco Unified CM system.
::= { ccmGlobalInfo 29 }
ccmInstallationId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The installation component identifier of the local Cisco Unified CM component(ccm.exe).
::= { ccmGlobalInfo 30 }
ccmPartiallyRegisteredPhones OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The number of phones that are partially registered with the local Cisco Unified CM.
::= { ccmGlobalInfo 31 }
ccmH323TableEntries OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The current number of entries in ccmH323DeviceTable. The initial value of this object is 0 and it
will be incremented every time when there is an addition to the ccmH323DeviceTable. When the
Cisco Unified CM is restarted, this will be reset to 0.
::= { ccmGlobalInfo 32 }
ccmSIPTableEntries OBJECT-TYPE
Cisco Unified Communications Manager Managed Services Guide
7-58
Chapter 7 Cisco Management Information Base
OL-22523-01