Deviceresetinitiated - Cisco MCS-7825-H3-IPC1 Service Manual

Informational-Level Alarms

DeviceResetInitiated

Device reset initiated on the specified device.
This alarm occurs when a device is reset via the Reset button in Cisco Unified CM Administration. Reset
may cause the device to shut down and come back in service. A device can be reset only when it is
registered with Cisco Unified Communications Manager.
History
Cisco Unified Communications
Release
8.0(1)
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Informational (6)
Parameters
Device name [Optional]. [String] Device type. [Optional] [Enum] Product type [String]
Enum Definitions for DeviceType
Code
10
11
30
40
42
43
47
48
50
51
52
53
62
70
71
Cisco Unified Communications Manager Managed Services Guide
6-360
Action
•
•
Device Type
CISCO_VGC_PHONE
CISCO_VGC_VIRTUAL_PHONE
ANALOG_ACCESS
DIGITAL_ACCESS
DIGITAL_ACCESS+
DIGITAL_ACCESS_WS-X6608
ANALOG_ACCESS_WS-X6624
VGC_GATEWAY
CONFERENCE_BRIDGE
CONFERENCE_BRIDGE_HARDWARE
CONFERENCE_BRIDGE_HARDWARE_HDV2
CONFERENCE_BRIDGE_HARDWARE_WS-SVC-CMM
H323_GATEWAY
MUSIC_ON_HOLD
DEVICE_PILOT
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Enum Definitions for DeviceType are updated.
Parameters added: Product type [String]
OL-22523-01